Formats & Media
Oil-Based Dispersions
Water-Based Dispersions Modified Powders
We convert powders into active technology - surface‑modified and dispersion‑stable - so particles reach the friction interface and form protective tribofilms.
Tailored surface chemistry bonds particles to both the base fluid and the metal interface for real tribological work-no inert floaters.
Rheology and polarity control prevent agglomeratio /sedimentation, ensuring uniform AW/AF/EP over the entire service life.
Functionalized particles migrate to the contact zone under flow and temperature gradients, then anchor to asperities.
Lower friction and wear, higher EP capacity, improved heat dissipation, extended lubricant life, and measurable efficiency gains.
Pre-dispersed concentrates remove airborne dust hazards in blending and application—safer for people and plants.
PFAS/PTFE-free alternatives andREACH-aligned chemistries for next gen. eco-responsible lubricants and coatings.
Optimized polarity and flow deliver particles to the interface.
Functional groups anchor to metal; film nucleation begins.
Nanofilm forms; shear drops; wear and heat decline.
Agglomeration and filter loading
Abrasion and inconsistent results
Sedimentation during storage
Presence ≠ performance. Interface delivery is required.
Surface functionalization
Long-term dispersion stability
Verified EP/AW/AF improvements
Functionalization + dispersion = technology.
Ultra-low friction; EP synergy; high-temperature resilience.
Sub-micron / nano
Oil / Water dispersions
Low treat rate
Cost-effective MoS₂reduction/replacement; stability without agglomeration.
Sub-micron
Modified powder
Stable dispersion
Low friction + thermal conductivity; dielectric options.
Sub-micron
Thermal + tribology
Powder/Dispersion
PFAS-free tribology with proven friction/wear gains.
PFAS-free
REACH-aligned
Regulatory-ready
Oil-Based Dispersions
Water-Based Dispersions Modified Powders
Ready-to-use concentrates engineered for polarity/viscosity; consistent AW/AF/EP without airborne particle hazards.
Use-cases: Engine/gear/hydraulic oils, chain lubes, aerosols
Quarts/Liters
Pails
Drums
IBCs/Totes
Dispersions provide safer handling by eliminating the airborne particle risks associated with dry powders.
Tested under ASTM/ISO protocols with ICP‑OES and LaserDiffraction PSD (ISO 13320) for material characterization. Lab services available for partners and external customers.
Performance metrics (e.g., oil‑life extension, fuel reduction, wear/EP results) are based on laboratory testing and controlled field evaluations. Actual results vary by formulation, equipment, and duty cycle. Users must validate suitability in their systems. No implied warranties for third‑party formulations.
Request samples or talk with our R&D team about functionalized MoS₂, WS₂, and hBN in powder or dispersion form for your specific application.
